|
|
|
|
The KÖSTER Universal Floor System is an easy to apply coating and sealing system for mineral substrates for light to moderate mechanical and chemical stresses in commercial and private real estate. Light stresses are e.g., when used in a storage room. Medium stresses arise e.g., when loaded with forklifts or pallet trucks, driving in private garages or the effects of de-icing salt from vehicles.
As a water-based epoxy resin, KÖSTER CT 215 Universal Floor is also suitable for coating damp substrates. In cases where moisture can be trapped behind the coating, such as non-waterproofed floor slabs or balconies, KÖSTER VAP I 2000 should be applied to protect against moisture and water vapor transmission. The epoxy resin KÖSTER CT 215 Universal Floor is applied to the prepared substrate as primer, as well as a leveling flow coat. With the incorporation of KÖSTER Filler fine, layer thicknesses of up to 2 mm can be achieved.
Through the use of KÖSTER Color Chips in contrast and rejection broadcast and the incorporation of KÖSTER Anti-Slip Granules 20, a wide variety of individual surface structures and designs can be achieved. When applied outside, the KÖSTER CT 215 Universal Floor must be fully broadcasted to rejection and sealed. By medium stresses, the two-component sealant KÖSTER TS Transparent must be used.
Surface protection for the walls can be easily achieved with KÖSTER Renovation Paint White.
Always adhere to the specifications in the respective Technical Guidelines. For detailed installation guidelines, consult the latest System Data sheet.
